Home > Product Information > Motorized Actuators >
DGII Series(LEGACY) > List of Product > DG85R-ARAA-2
- Accessory
- Actuator, Control Circuit, Cable for Motor, I/O Signal Connector, Connector for Regeneration Unit Input/Main Power Input Terminals, Connector for 24 VDC Power-Supply Input/Regeneration Unit Thermal Inpu, Lever for wiring connector, Operating Manua
● The product comes with a 2 m cable for motor.
If you need cables longer than 3 m or cables offering excellent flexibility, select appropriate cables from the accessories (sold separately).
- Safety Standards
Product Name | Product Leadtime | Unit Price(INR) | |
---|---|---|---|
DG85R-ARAA-2 | Please contact us for more info | Please contact us for more info |
You cannot add this product to a cart. Sorry for your inconvenience but please contact to customer support centre.
●Production Information
Discontinued product in 1/Apr/2017
●Component Name
DGM85R-ARAC(Actuator)
LSD-A(Control Circuit)
Motor Type | AR Series |
---|---|
Shaft Type | Single Shaft |
Output Table Supporting Bearing | Cross-Roller Bearing |
Frame Size | 85mm |
Electromagnetic Brake | Without |
Driver Type | Pulse Input Type |
Repetitive Positioning Accuracy | ±15sec (±0.004˚) |
Resolution | 9000P/R(0.04°/step)、18000P/R(0.02°/step)、90000P/R(0.004°/step)、180000P/R(0.002°/step) *1 |
Maximum Holding Force - Power ON | 1.8Nm |
Maximum Holding Force - Power OFF | 0Nm |
Lost Motion | 2 arc minuteute (0.033˚) |
Permissible Torque | 2.8N・m |
Inertial Moment J | 22092×10^-7kg・m^2 |
Permissible Speed | 200r/min |
Gear Ratio | 18 |
Angular Transmission Error | 4 arc minute (0.067˚) |
Permissible Thrust Load | 500N |
Permissible Moment Load | 10N・m |
Runout of Output Table Surface | 0.015mm |
Runout of Output Table Inner (Outer) Diameter | 0.015mm |
Parallelism of Output Table | 0.030mm |
Actuator Degree of Protection | IP40(IP20 for motor connector) |
CE Marking | affixed |
Speed and Positioning Control Command | Pulse Input |
Power Supply Input - Voltage | Single-Phase 100-115 VAC -15%~+10% |
Power Supply Input - Frequency | 50/60Hz |
Power Supply Input - Current | 2.9A |
Mass: Actuator | 1.17kg |
Mass: Control Circuit | 0.75kg |
- ●You can set 1 of 4 resolutions using the resolution select switch or resolution select input.
The resolution factory setting is 18000 P/R (0.02˚/step).
- ● Depending on the driving conditions, a considerable amount of heat may be generated by the motor. Be sure to keep the temperature of the motor case at approximately 100˚C max.
● The repetitive positioning accuracy is measured at a constant temperature (normal temperature) under a constant load.
The link of Web2CAD site can be used for 3D CAD data downloading as well. For more details, please click here.
2D-CAD | Actuator | D2854.dxf |
---|---|---|
Control Circuit | D2861.dxf | |
3D-CAD | Actuator | D2854-A.step |
Control Circuit | D2861.step | |
Document | Hollow Rotary Actuator DGII Series | DGII.pdf |
Operating Manual | Hollow Rotary Actuators DGIISeries Actuator Edition | HL-14053E.pdf |
Motorized Actuator Driver AC power input Pulse input type LSD-A, LSD-C, LSD-S | HL-14042JE.pdf | |
Data Setter OPX-2A OPERATING MANUAL Before Use | HM-40142E.pdf | |
Data Setter OPX-2A OPERATING MANUAL DGII Series / EAS Series Built-in Controller Type | HL-14055E.pdf |
Dimension |
---|
Actuator Control Circuit Cable |
Characteristics Diagram |
---|
Speed – Torque Load Inertia - Positioning Time |
Other specifications |
---|
Other specifications Safety Standards |