aSTEP Stepper Servo Motors

αSTEP is a stepper motor-based motor that is compact, high response, high reliability, high-efficiency motor that have unique control that is a hybrid of the advantages of both open loop control and closed loop control.

The motor’s position is always monitored, and can automatically switch between the two control types depending on conditions. It normally operates in open loop control, and activates synchronously with commands, providing high responsivity. Under an overload condition, the motor position is corrected and it operates in the closed-loop control mode.

αSTEP Motor and Driver Packages

AC Power Supply Input

AZ Series
AC Input
FLEX Built-in Controller Type
Network compatible drivers

Equipped with a ABZO sensor of the new development to the motor, and shortening of homing time to realize the motion control that does not use an external sensor. With built-in function of the pulse oscillator and lead to a variety of higher-level system that correspond to the FLEX that was equipped with the interface.

AZ Series
AC Input
Pulse Input Type

Equipped with ABZO a newly developed (Absorbing) sensor to the motor, to achieve the motion control that does not use an external sensor and shortening of homing time. The pulse input type enables the motor to be controlled from a pulse generator provided by the customer.

DC Power Supply Input

AZ Series DC power Supply Input FLEX Built-in Controller type
Network compatible drivers

Equipped with a ABZO sensor of the new development to the motor, and shortening of homing time to realize the motion control that does not use an external sensor. With built-in function of the pulse oscillator and lead to a variety of higher-level system that correspond to the FLEX that was equipped with the interface.

AZ Series DC power input pulse type

Equipped with ABZO a newly developed (Absorbing) sensor to the motor, to achieve the motion control that does not use an external sensor and shortening of homing time. The pulse input type enables the motor to be controlled from a pulse generator provided by the customer.

AZ Series Multi Axis Drivers

The multi axis drivers can be connected to DC power supply motors of our AZ Series and to the motorized actuators equipped with motors. We provide the multi axis drivers that can support MECHATROLINK-III, or EtherCAT Drive Profile. No. of axes: 2, 3, or 4.

_

AZ Series mini Drivers
【 New release！】

Network-capable drives that are smaller and lighter than box drives. Battery power is also supported. Motors that can be connected to the DC power input of the AZ series, and electric modules equipped with the above motors.

Page Top