Home > Product Information > Motorized Actuators >
DGII Series(LEGACY) > List of Product > DG200R-ARMCD-2
- Accessory
- Actuator, Control Circuit, Cable for Motor, Cable for Electromagnetic Brake✽, Connector for Input Signal, Connector for Output Signal, Sensor Signal Connector, Connector for Regeneration Unit Input/Main Power Input Terminals, Connector for 24 VDC Power-Supply Input/Regeneration Unit Thermal Input/Electromagnetic Brake Output Terminals, Lever for wiring connector, Operating Manua
● The product comes with a 2 m cable for motor and cable for electromagnetic brake.
If you need cables longer than 3 m or cables offering excellent flexibility, select appropriate cables from the accessories (sold separately).
- Safety Standards
Product Name | Product Leadtime | Unit Price(INR) | |
---|---|---|---|
DG200R-ARMCD-2 | Please contact us for more info | Please contact us for more info |
You cannot add this product to a cart. Sorry for your inconvenience but please contact to customer support centre.
●Production Information
Discontinued product in 1/Apr/2017
●Component Name
DGM200R-ARMC(Actuator)
LSD-CD(Control Circuit)
Motor Type | AR Series |
---|---|
Shaft Type | Electromagnetic Brake Type |
Output Table Supporting Bearing | Cross-Roller Bearing |
Frame Size | 200mm |
Electromagnetic Brake | With |
Driver Type | Built-In Controller Type |
Repetitive Positioning Accuracy | ±15sec (±0.004˚) |
Resolution | The resolution can be set from 1800 to 180000 P/R by using parameters. |
Maximum Holding Force - Power ON | 20Nm |
Maximum Holding Force - Power OFF | 0Nm |
Maximum Holding Force - Electromagnetic Brake | 20Nm |
Lost Motion | 2 arc minuteute (0.033˚) |
Permissible Torque | 50N・m |
Inertial Moment J | 955280×10^-7kg・m^2 |
Permissible Speed | 110r/min |
Gear Ratio | 18 |
Angular Transmission Error | 2 arc minute (0.033˚) |
Permissible Thrust Load | 4000N |
Permissible Moment Load | 100N・m |
Runout of Output Table Surface | 0.015mm |
Runout of Output Table Inner (Outer) Diameter | 0.030mm |
Parallelism of Output Table | 0.050mm |
Actuator Degree of Protection | IP40(IP20 for motor connector) |
Electromagnetic Brake Power Supply Input Current | 24 VDC +/-5% 0.25 *1 |
CE Marking | affixed |
Speed and Positioning Control Command | Built-In Controller |
Power Supply Input - Voltage | Single-Phase 200-240 VAC -15%~+6% |
Power Supply Input - Frequency | 50/60Hz |
Power Supply Input - Current | 3.7A |
Power Supply Input - Control Power Supply | 24 VDC ±5% 0.5A |
Mass: Actuator | 10.1kg |
Mass: Control Circuit | 0.75kg |
- ✽1 If the wiring distance between the motor and driver is extended to 20 m min. using an accessory cable (sold separately), the 24 VDC±4% specification applies.
- ● Depending on the driving conditions, a considerable amount of heat may be generated by the motor. Be sure to keep the temperature of the motor case at approximately 100˚C max.
● The repetitive positioning accuracy is measured at a constant temperature (normal temperature) under a constant load.
The link of Web2CAD site can be used for 3D CAD data downloading as well. For more details, please click here.
2D-CAD | Actuator | D2858.dxf |
---|---|---|
Control Circuit | D2862.dxf | |
3D-CAD | Actuator | D2858.step |
Control Circuit | D2862.step | |
Document | Hollow Rotary Actuator DGII Series | DGII.pdf |
Operating Manual | Hollow Rotary Actuators DGIISeries Actuator Edition | HL-14053E.pdf |
Motorized Actuator Driver AC power input BuiltIn controller type LSD-AD, LSD-CD | HL-14043JE.pdf | |
Data Setter OPX-2A OPERATING MANUAL Before Use | HM-40142E.pdf | |
Data Setter OPX-2A OPERATING MANUAL DGII Series / EAS Series Built-in Controller Type | HL-14055E.pdf |
Dimension |
---|
Actuator Control Circuit Cable |
Characteristics Diagram |
---|
Speed – Torque Load Inertia - Positioning Time |
Other specifications |
---|
Other specifications Safety Standards |