Home > Product Information > Motorized Actuators >
DGII Series(LEGACY) > List of Product > DG130R-ARBCD-2
- Accessory
- Actuator, Control Circuit, Cable for Motor, Connector for Input Signal, Connector for Output Signal, Sensor Signal Connector, Connector for Regeneration Unit Input/Main Power Input Terminals, Connector for 24 VDC Power-Supply Input/Regeneration Unit Thermal Inpu, Lever for wiring connector, Operating Manua
● The product comes with a 2 m cable for motor.
If you need cables longer than 3 m or cables offering excellent flexibility, select appropriate cables from the accessories (sold separately).
- Safety Standards
Product Name | Product Leadtime | Unit Price(INR) | |
---|---|---|---|
DG130R-ARBCD-2 | Please contact us for more info | Please contact us for more info |
You cannot add this product to a cart. Sorry for your inconvenience but please contact to customer support centre.
●Production Information
Discontinued product in 1/Apr/2017
●Component Name
DGM130R-ARBC(Actuator)
LSD-CD(Control Circuit)
Motor Type | AR Series |
---|---|
Shaft Type | Double Shaft |
Output Table Supporting Bearing | Cross-Roller Bearing |
Frame Size | 130mm |
Electromagnetic Brake | Without |
Driver Type | Built-In Controller Type |
Repetitive Positioning Accuracy | ±15sec (±0.004˚) |
Resolution | The resolution can be set from 1800 to 180000 P/R by using parameters. |
Maximum Holding Force - Power ON | 12Nm |
Maximum Holding Force - Power OFF | 0Nm |
Lost Motion | 2 arc minuteute (0.033˚) |
Permissible Torque | 12N・m |
Inertial Moment J | 150620×10^-7kg・m^2 |
Permissible Speed | 200r/min |
Gear Ratio | 18 |
Angular Transmission Error | 3 arc minute (0.05˚) |
Permissible Thrust Load | 2000N |
Permissible Moment Load | 50N・m |
Runout of Output Table Surface | 0.015mm |
Runout of Output Table Inner (Outer) Diameter | 0.015mm |
Parallelism of Output Table | 0.030mm |
Actuator Degree of Protection | IP20 |
CE Marking | affixed |
Speed and Positioning Control Command | Built-In Controller |
Power Supply Input - Voltage | Single-Phase 200-240 VAC -15%~+6% |
Power Supply Input - Frequency | 50/60Hz |
Power Supply Input - Current | 2.3A |
Power Supply Input - Control Power Supply | 24 VDC ±5% 0.5A |
Mass: Actuator | 2.65kg |
Mass: Control Circuit | 0.75kg |
- ● The back shaft of the motor in the double shaft type is intended for installing a slit disk. Do not apply load torque, overhung load or thrust load to the back shaft of the motor.
● Depending on the driving conditions, a considerable amount of heat may be generated by the motor. Be sure to keep the temperature of the motor case at approximately 100˚C max.
● The repetitive positioning accuracy is measured at a constant temperature (normal temperature) under a constant load.
The link of Web2CAD site can be used for 3D CAD data downloading as well. For more details, please click here.
2D-CAD | Actuator | D2855.dxf |
---|---|---|
Control Circuit | D2862.dxf | |
3D-CAD | Actuator | D2855-B.step |
Control Circuit | D2862.step | |
Document | Hollow Rotary Actuator DGII Series | DGII.pdf |
Operating Manual | Hollow Rotary Actuators DGIISeries Actuator Edition | HL-14053E.pdf |
Motorized Actuator Driver AC power input BuiltIn controller type LSD-AD, LSD-CD | HL-14043JE.pdf | |
Data Setter OPX-2A OPERATING MANUAL Before Use | HM-40142E.pdf | |
Data Setter OPX-2A OPERATING MANUAL DGII Series / EAS Series Built-in Controller Type | HL-14055E.pdf |
Dimension |
---|
Actuator Control Circuit Cable |
Characteristics Diagram |
---|
Speed – Torque Load Inertia - Positioning Time |
Other specifications |
---|
Other specifications |