Data Setting Software download

Programming data for controller can be set and edited using computer.

A dedicated cable is needed for the controller and computer to communicate.

EZED2(USB Version)

◆ Editing and saving data Monitor function Test Function
Operating data and parameters can be created and edited
◆Monitor Function
ON/OFF statuses of I/O signals can be monitored.
◆Test Function
I/O test can be performed to monitor input signals and cause output signals to be output forcibly.
Contents appear differently to different products

Please contact our Customer Service Center for communication cable or the software in CD-ROM

Singapore: 1800-842-0280
Malaysia: 1800-806161
Thailand: 1800-888-881

Applicable Products

Motorized Actuators EZ LIMO EZSII Series,EZSII Series Clean Room Type, ESR Series, SPFII Series, SPV Series, EZX Series

Motorized Cylinders EZ LIMO EZCII Series, EZA Series, PWAII Series


◆Data Setting Software EZED2

Software revision

VersionUpgradedLanguageDownload File
Ver.1.50 Windows 7 English 9.35MB (9,812,151byte)

For Windows XP/Vista version, do click here.

・If Microsoft.NET Framework 2.0 Service Pack 2 (in Windows 7) is already installed, software can be installed directly.

Software revision

Ver.1.50 February 2012 Addition of Operating Systems support


VersionApplicable OSDownload File
ORIENTAL MOTOR Device Driver Ver.1.2 Windows 7

For Windows XP/Vista version, do click here.
* The 32-bit version and the 64-bit version are included in the device driver download file.


Download manual for applicable product


  • Software is in ZIP compression format.
  • Please confirm if the file downloaded is the same size as indicated on the website.
  • If the file size does not match, kindly delete the file and download again.

Installation of software

Any existing EZED2 programme in the computer must be uninstalled before proceeding to installation of the programme.

  • Run the installer as Windows administrator
  • The ZIP file can be saved to any folder.
  • Uncompress ZIP file, double click「Setup.exe」to start step by step installation.


During the uninstallation process, please follow the manual.

Version upgrade

Uninstall EZED3 (if any) before installing the new version of EZED2.
(Current software version can be checked using 'Version')

Recommended Operating Environment

Operating Systems ・Microsoft Windows 2000 Professional Service Pack 4
Please make sure Microsoft Rollup1 is installed by checking 'Add or Remove Programs'

The following Operating Systems can support 32-bit and 64-bit:
・Microsoft Windows XP Home Edition Service Pack 3
・Microsoft Windows XP Professional Service Pack 3
・Microsoft Windows Vista Home Basic Service Pack 2
・Microsoft Windows Vista Home Premium Service Pack 2
・Microsoft Windows 7 Starter Service Pack 1
・Microsoft Windows 7 Home Premium Service Pack 1
・Microsoft Windows 7 Professional Service Pack 1

CPU ※2 Intel Core Processor 2GHz and above
Display XGA(1024×768) and above
1GB and above
Hard Disk※3 100MB and above of free space
Interface USB1.1 1 port
32-bit (x86) system only.
Minimum requirement to meet Operating Systems condition.
EZED2 needs Microsoft .NET Framework 2.0 Service Pack 2.
It will be installed automatically if it is not found (500MB hard disk space is needed).
Required disk space and memory differs accordingly to the operating system used.