- Accessory
- Motor, Control Circuit, Gearhead, Connection Cable (3 m), External Speed Potentiometer (With signal line), Installation Screws, Parallel Key, Operating Manual
- Safety Standards
-
| Product Name | Product Leadtime | Unit Price(INR) | |
|---|---|---|---|
| BLE23SM15S-3 | Please contact us for more info | Please contact us for more info |
You cannot add this product to a cart. Sorry for your inconvenience but please contact to customer support centre.
●Production Information
Discontinued product in 31/Mar./2024
●Component Name
BLEM23M2-GFS（Motor）
GFS2G15（Gearhead）
BLED3SM（Control Circuit）
| Frame Size | 60mm |
|---|---|
| Shaft/Gear Type | Combination Type Parallel Shaft Gearhead |
| Gear Ratio | 15 |
| Electromagnetic Brake | With |
| Included Cable | 3m |
| Rated Output Power | 30W |
| Power Supply Input Rated Voltage | Three-Phase 200-240VAC |
| Power Supply Input Permissible Voltage Range | -15-+10% |
| Power Supply Input Rated Frequency | 50/60Hz |
| Power Supply Input Permissible Voltage Range | ±5% |
| Power Supply Input Rated Input Current | 0.45A |
| Power Supply Input Maximum Input Current | 1.2A |
| Rated Torque (Motor Shaft) | 0.1N･m |
| Starting Torque (Motor Shaft) | 0.2N･m |
| Rated Speed (Motor Shaft) | 3000r/min |
| Speed Control Range | 6.7-267r/min |
| Permissible Torque | 1.4N･m（6.7-200r/min） 1N･m（267r/min） |
| Permissible Load Inertia J | 110×10^-4kg・m^2 |
| Permissible Load Inertia J (When instantaneous stop or instantaneous bi-directional operation is performed) | 14×10^-4kg・m^2 |
| Rotor Inertia J | 0.087×10^-4kg・m^2 |
| Speed Regulation (Load) | ±0.5% or less: 0∼Rated torque, at rated speed, at rated voltage, at normal ambient temperature |
| Speed Regulation (Voltage) | ±0.5% or less: Conditions Rated voltage −15∼+10%, rated speed, no load, normal temperature |
| Speed Regulation (Temperature) | ±0.5% or less: 0∼+50˚C, at rated speed, with no load, at rated voltage |
| Continuous Regenerative Power | 100W |
| Instantaneous Regenerative Power | 240W |
| Applicable Regeneration Unit | EPRC-400P *1 |
| Electromagnetic Brake Type | Power off activated type *2 |
| Electromagnetic Brake Static Friction Brake | 0.1N･m |
| CE Marking | affixed |
| Speed Setting Method | Select one of the following methods. · Set using the internal speed potentiometer · External speed potentiometer (included):PAVR-20KZ (20 kΩ, 1/4 W) · Setting by External DC Voltage:0∼5 VDC or 0∼10 VDC, 1 mA or more |
| Acceleration Time / Deceleration Time | Set using acceleration and deceleration time potentiometer: 0.2∼15 seconds (3000 r/min at no load) |
| Multi-Speed Setting Method | 2 Speeds: 1 speed set by the internal speed potentiometer and 1 speed set by the external speed potentiometer (20 kΩ, 1/4W) or external DC voltage (0∼5 VDC or 0∼10 VDC). |
| Protective Function | When the following protective functions are activated, the motor will coast to a stop, and the Alarm output will be turned OFF. Overload, Sensor error, Initial sensor error, Overvoltage, Undervoltage, Overspeed, Overcurrent, EEPROM error, Regeneration unit overheat, External stop,Initial operation inhibition, Main circuit output error |
| Max. Extension Distance | Motor and Driver Distance: 20.4 m (when an Connection Cable is used) |
| Time Rating | Continuous |
| Mass: Motor | 1.4kg |
| Mass: Control Circuit | 0.7kg |
- ●The starting torque can be used a maximum duration of approximately five seconds.
- ✽1 Attach the regeneration unit to a location that has the same heat radiation capability as an aluminum heat radiation plate that is 350×350 mm and 3 mm thick.
✽2 Do not start or stop the motor by turning ON/OFF the power supply, as it will cause the electromagnetic brake to wear abnormally.
The link of Web2CAD site can be used for 3D CAD data downloading as well. For more details, please click here.
| 2D-CAD | Combination Type Motor | A1132A.dxf |
|---|---|---|
| Control Circuit | A916.dxf | |
| 3D-CAD | Combination Type Motor | A1132A.zip |
| Control Circuit | A916.step | |
| 3D-CAD(web2CAD) | Motor / Gearhead | to web2CAD site |
| Control Circuit | to web2CAD site | |
| Document | BLE Series | 1306sp_brushless_ble_a.pdf |
| Operating Manual | Brushless Motor and Driver Package BLE Series Standard type, Electromagnetic brake type | HM-5245E.pdf |
| Data Setter OPX-2A OPERATING MANUAL Before Use | HM-40142E.pdf | |
| Data setter OPX-2A OPERATING MANUAL BLE Series | HP-5042E.pdf |
| Dimension |
|---|
|
Motor Control Circuit Connection Cable |
| Characteristics Diagram |
|---|
|
Speed – Torque Characteristics |
| Other specifications |
|---|
|
Other specifications |