- Accessory
- Actuator, Control Circuit, I/O signal Connector, Power Connector, Operating Manual
- Safety Standards
-
| Product Name | Product Leadtime | Unit Price(INR) | |
|---|---|---|---|
| DG60-ASBK | Please contact us for more info | Please contact us for more info |
You cannot add this product to a cart. Sorry for your inconvenience but please contact to customer support centre.
●Production Information
Discontinued product in 1/Apr./2018
●Component Name
DGM60-ASBK（Actuator）
ASD10A-K（Control Circuit）
| Shaft Type | Double Shaft |
|---|---|
| Output Table Supporting Bearing | Deep-Groove Ball Bearing |
| Frame Size | 60mm |
| Electromagnetic Brake | Without |
| Driver Type | Pulse Input Type |
| Repetitive Positioning Accuracy | ±15sec （±0.004˚） |
| Resolution | 9000P/R 18000P/R 90000P/R 180000P/R |
| Maximum Holding Force - Power ON | 0.45Nm |
| Maximum Holding Force - Power OFF | 0Nm |
| Lost Motion | 2min (0.034˚) |
| Permissible Torque | 0.9N･m |
| Inertial Moment J | 4324×10^-7kg・m^2 |
| Permissible Speed | 200r/min |
| Gear Ratio | 18 |
| Angular Transmission Error | 4min (0.067˚) |
| Permissible Thrust Load | 100N |
| Permissible Moment Load | 2N･m |
| Runout of Output Table Surface | 0.03mm |
| Runout of Output Table Inner (Outer) Diameter | 0.03mm |
| Parallelism of Output Table | 0.05mm |
| Actuator Degree of Protection | IP40** |
| Standard | UL、CSA |
| CE Marking | affixed |
| Speed and Positioning Control Command | Pulse Input |
| Power Supply Input - Voltage | 24VDC±10% |
| Power Supply Input - Current | 1.0A |
| Mass: Actuator | 0.5kg |
| Mass: Control Circuit | 0.25kg |
- ** IP20 for motor connector
- ●You can set one of four resolutions using the resolution select switch or resolution select signal.
9000 P/R (0.04˚/step [500] [×1] setting)
18000 P/R (0.02˚/step [1000] [×1] setting)
90000 P/R (0.004˚/step [500] [×10] setting)
180000 P/R (0.002˚/step [1000] [×10] setting)
The initial settings for the driver are [1000] [×1] and 18000 P/R (0.02˚/step).
- ●The back shaft of the motor is intended for installing a slit disc. Do not apply load torque, overhung load or thrust load to the back shaft of the motor.
The link of Web2CAD site can be used for 3D CAD data downloading as well. For more details, please click here.
| 2D-CAD | Actuator | D469.dxf |
|---|---|---|
| Actuator home-sensor set (accessory) is attached | D525.dxf | |
| Control Circuit | B198.dxf | |
| 3D-CAD(web2CAD) | Actuator | to web2CAD site |
| Control Circuit | to web2CAD site | |
| Document | DG | ls_dg_a.pdf |
| Operating Manual | Hollow Rotary Actuators DG Series | HG-8032E.pdf |
| Dimension |
|---|
|
Actuator Control Circuit |
| Characteristics Diagram |
|---|
|
Characteristics |
| Other specifications |
|---|
|
Other specifications Safety Standards |