Electric Linear Slides EZS Series

EZSM6D010ARAC

EZSM6D010ARAC

Actuator

Connection Cable (Actuator~Control Circuit)

Product Classification Product Name List Price Shipping Date
Actuator EZSM6D010ARAC Rs. 61,533 30 Working Days (Dispatch)
• This product is an actuator only. A combination with the following products is required for driving.
• Driver: Select the driver that best describes your needs from the [Driver Introduction].
• The motor cable and electromagnetic brake cable from the motor cannot be connected directly to the driver. When connecting to the driver, use a connection cable.

Included

  • Actuator: Bolt for Fixing

Specifications

Characteristics

Operating Speed - Load Mass
Operating Speed - Load Mass

Operating Speed - Load Mass

About this vertical drive
About this vertical drive

About this vertical drive

Dimensions

Connection Cable (When Selected)
Connection Cable (When Selected)

Connection Cable (When Selected)

Flexible Connection Cable (When Selected)
Flexible Connection Cable (When Selected)

Flexible Connection Cable (When Selected)

Data Download

Other Specifications

Travel Direction

At the time of shipment, the travel direction of the table is set as follows.

Motor Mounting: Straight Type  Motor Mounting: Reversed Motor Type

Standards

Regulations and Standards Materials

Documents about compliance with regulations and standards can be downloaded from the "Data Download" tab on the product details page.
(The types of files available for download vary by product.)

Explanations of the Global Laws, Regulations and Standards can be found here.

Information about our compliance with regulations and standards for each of our product series can be found here.

Hazardous Substances

The product does not contain any substances (10 substances) exceeding the regulation values of the RoHS Directive (2011/65/EU, 2015/863/EU).

Driver Introduction

You can choose from the following drivers. Click here for details on driver features and product lines

Driver Type Features Product Name

Built-in Controller Type

ARD-AD2
Features

With this type, operation data is set in the driver, then selected and executed from the host system.
Host system connection and control can be performed with any of the following: I/O, Modbus (RTU), RS-485 communication, or an industrial network.
Using the network converter (sold separately), CC-Link, MECHATROLINK, and EtherCAT communications are possible.
 

  • I would like to run it using an industrial network
  • I would like to run it using RS-485 communication
  • I would like to acquire motor information from a host controller or a touch screen
Product Name

Single-Phase 100-120 VAC
ARD-AD2

Single-Phase/Three-Phase 200-240 VAC
ARD-CD2

Driver Type

Pulse Input Type

ARD-A
Features

Operation is executed according to the pulse signal input to the driver.
The motor is controlled from a positioning module (pulse generator) provided by the customer.
Status information for the motor (position, speed, torque, alarms, temperature, and more) can be monitored by using the support software MEXE02.
 

  • I would like to run it using pulse input
  • I would like to obtain motor information via support software MEXE02
Product Name

Single-Phase 100-115 VAC
ARD-A

Single-Phase 200-230 VAC
ARD-C

Three-Phase 200-230 VAC
ARD-S

close
close
close
close
close
close